SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 50

Page: 50 / 100

Fault list – safety technology

Fault 63 Speed-dependent drive safety function

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 63.3

Description: SLS 3 limit speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLS 3 limit speed exceeded in positive direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 3), and adjust if necessary.

Subfault: 63.4

Description: SLS 4 limit speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLS 4 limit speed exceeded in positive direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the limit speed of the safety card (limit
speed SLS 4), and adjust if necessary.

Subfault: 63.5

Description: SLS 1 limit speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLS 1 limit speed exceeded in negative direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 1), and adjust if necessary.

Subfault: 63.6

Description: SLS 2 limit speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLS 2 limit speed exceeded in negative direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 2), and adjust if necessary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands