SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 79

Page: 79 / 100

Fault list – safety technology

Fault 67 Safe communication

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 67.21

Description: Safety protocol warning

Fault class: Warning

Cause

Measure

Safety protocol signaled warning.

– Acknowledge the warning.

– Restart safe communication.

– If the warning occurs again, switch the device
off and on again.

– If the warning occurs repeatedly, contact
SEW‑EURODRIVE Service.

Subfault: 67.22

Description: Faulty configuration of process data lengths

Fault class: Warning

Cause

Measure

Configured process data lengths of safety pro-
tocol in fieldbus master do not match expected
lengths.

– Check the configuration of the communication
parameters of the safety card.

– Acknowledge the warning.

– Restart safe communication.

– If the warning occurs again, switch the device
off and on again.

– If the warning occurs repeatedly, contact
SEW‑EURODRIVE Service.

Subfault: 67.23

Description: Configuration error

Fault class: System error

Cause

Measure

Error in configuration of safety protocol.

– Check the configuration of the communication
parameters of the safety card.

– Acknowledge the warning.

– Restart safe communication.

– If the warning occurs again, switch the device
off and on again.

– If the warning occurs repeatedly, contact
SEW‑EURODRIVE Service.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands