SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 66

Page: 66 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.2

Description: Faulty firmware signature

Fault class: System error

Cause

Measure

Failed to confirm firmware.

– Confirm the firmware signature again.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

Subfault: 66.3

Description: EDM F-DO 00 – error signal contact 1

Response: FS – warning

Cause

Measure

The external switching element on F-DO 00 is de-
fective. Signal contact 1 deviates from the set-
point.

Check the external switching element at F-DO 00.

Subfault: 66.4

Description: EDM F-DO 01 – error signal contact 1

Response: FS – warning

Cause

Measure

The external switching element on F-DO 01 is de-
fective. Signal contact 1 deviates from the set-
point.

Check the external switching element at F-DO 01.

Subfault: 66.11

Description: EDM F-DO 00 – error signal contact 2

Response: FS – warning

Cause

Measure

The external switching element on F-DO 00 is de-
fective. Signal contact 2 deviates from the set-
point.

Check the external switching element at F-DO 00.

Subfault: 66.12

Description: EDM F-DO 01 – error signal contact 2

Response: FS – warning

Cause

Measure

The external switching element on F-DO 01 is de-
fective. Signal contact 2 deviates from the set-
point.

Check the external switching element at F-DO 01.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands