SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 51

Page: 51 / 100

Fault list – safety technology

Fault 63 Speed-dependent drive safety function

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 63.7

Description: SLS 3 limit speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLS 3 limit speed exceeded in negative direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 3), and adjust if necessary.

Subfault: 63.8

Description: SLS 4 limit speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLS 4 limit speed exceeded in negative direction
of movement.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(limit speed SLS 4), and adjust if necessary.

Subfault: 63.9

Description: SLS maximum speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLS maximum speed exceeded in positive direc-
tion of movement during monitoring delay.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed), and adjust if necessary.

Subfault: 63.13

Description: SLS maximum speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLS maximum speed exceeded in negative direc-
tion of movement during monitoring delay.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed), and adjust if necessary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands