SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 58

Page: 58 / 100

Fault list – safety technology

Fault 63 Speed-dependent drive safety function

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 63.69

Description: SSR 1 lower limit speed exceeded

Fault class: Warning

Cause

Measure

SSR 1 lower speed exceeded.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(lower limit speed SSR 1), and adjust if neces-
sary.

Subfault: 63.70

Description: SSR 2 lower limit speed exceeded

Fault class: Warning

Cause

Measure

SSR 2 lower speed exceeded.

– Check the speed setpoint of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(lower limit speed SSR 2), and adjust if neces-
sary.

Subfault: 63.73

Description: SSR maximum speed exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SSR maximum speed exceeded in positive direc-
tion of movement during monitoring delay.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed), and adjust if necessary.

Subfault: 63.74

Description: SSR maximum speed exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SSR maximum speed exceeded in negative di-
rection of movement during monitoring delay.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed), and adjust if necessary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands