SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 76

Page: 76 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.120

Description: Muting activation

Fault class: Message

Cause

Measure

Muting has been activated.

For information only.

Subfault: 66.130

Description: Invalid production data

Fault class: Message

Cause

Measure

Production data invalid in one of the two data
sets. Repair started.

For information only.

Subfault: 66.140

Description: Activation of start inhibit

Fault class: Message

Cause

Measure

Start inhibit has been activated by one of the fol-
lowing actions:

– Switching on the device.

– Ending emergency mode.

– Setting parameters when limit values are viola-
ted.

– Setting parameters while the brake test is ac-
tive.

Acknowledge the fault or activate muting.

Subfault: 66.150

Description: Faulty data (signature) from data memory

Fault class: Message

Cause

Measure

Faulty data (signature) read from data memory.
Data corrected.

For information only.

Subfault: 66.151

Description: New firmware update started

Response: FS – log

Cause

Measure

New signatures transferred to safety card and
firmware update started.

For information only.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands