SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 72

Page: 72 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.74

Description: SREF reference travel – error with second reference switch signal

Response: FS – warning

Cause

Measure

Error detected during SREF reference travel due
to wrong reference switch signal.

– Repeat the reference travel.

– Check the cabling of the reference switch and
adjust if necessary.

Subfault: 66.75

Description: SREF reference travel – error with first reference switch signal

Response: FS – warning

Cause

Measure

Error detected during SREF reference travel due
to wrong reference switch signal.

– Repeat the reference travel.

– Check the cabling of the reference switch and
adjust if necessary.

Subfault: 66.76

Description: SREF reference travel – reference switch discrepancy error

Response: FS – input fault

Cause

Measure

Parameterized maximum cam discrepancy with
2-channel evaluation of reference switch signals
was exceeded.

– Check the 2-channel reference switch.

– Check the parameter setting of the safety card
and increase the cam discrepancy if necessary.

Subfault: 66.77

Description: SREF direct referencing – time exceeded between activation and trigger signal

Response: FS – warning

Cause

Measure

No trigger signal detected within 60 seconds from
activation of SREF direct referencing.

Activate SREF direct referencing again and ex-
ecute within 60 seconds.

Subfault: 66.78

Description: SREF reference travel – cam signal despite inactive SREF function

Response: FS – warning

Cause

Measure

Although the status of SREF reference travel is
inactive, a cam was detected after completed ref-
erence travel.

– Deactivate SREF reference travel.

– Check the referencing process.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands