SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 18

Page: 18 / 100

Fault list – safety technology

Fault 14 Encoder 2

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 14.56

Description: Maximum speed exceeded while encoder fault muting is active

Response: FS – system error

Cause

Measure

Maximum permitted speed exceeded while en-
coder fault muting is active.

– Check the maximum speed of the application
while encoder fault muting is active and adjust if
necessary.

– Check the parameter setting of the safety card
and adjust if necessary.

Subfault: 14.57

Description: Maximum speed exceeded

Response: FS – encoder fault

Cause

Measure

Permitted maximum speed exceeded.

– Check the maximum speed of the application
and adjust if necessary.

– Check the parameter setting of the safety card
and adjust if necessary.

Subfault: 14.58

Description: Detection limit exceeded

Response: FS – warning

Cause

Measure

Speed exceeded sensing limit.

– Check the maximum speed of the application
and adjust if necessary.

– Check the parameter setting of the safety card
and adjust if necessary.

Subfault: 14.59

Description: Encoder no longer referenced

Response: FS – warning

Cause

Measure

Diagnostics error detected during encoder evalu-
ation. Referencing is canceled.

– Remove the cause of the error.

– Reference the encoder again.

Subfault: 14.60

Description: Travel limit exceeded

Response: FS – encoder fault

Cause

Measure

Travel limit violated for an application with limited
travel distance.

– Check the startup parameters.

– Check the application.

– Perform referencing again.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands