SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 64

Page: 64 / 100

Fault list – safety technology

Fault 65 Other drive safety function

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 64.53

Description: SLP encoder system not referenced

Response: FS – warning

Cause

Measure

SLP drive safety function activated with non-refer-
enced encoder system.

Reference the encoder system before activating
the SLP drive safety function.

2.14

Fault 65 Other drive safety function

Subfault: 65.1

Description: SLA 1 limit acceleration exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLA 1 limit acceleration exceeded in positive di-
rection of movement.

– Check the acceleration of the application while
the drive safety function is active, and adjust if
necessary.

– Check the parameter setting of the safety card
(limit acceleration SLA 1), and adjust if neces-
sary.

Subfault: 65.2

Description: SLA 2 limit acceleration exceeded in positive direction of movement

Fault class: Warning

Cause

Measure

SLA 2 limit acceleration exceeded in positive di-
rection of movement.

– Check the acceleration of the application while
the drive safety function is active, and adjust if
necessary.

– Check the parameter setting of the safety card
(limit acceleration SLA 2), and adjust if neces-
sary.

Subfault: 65.5

Description: SLA 1 limit acceleration exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLA 1 limit acceleration exceeded in negative di-
rection of movement.

– Check the acceleration of the application while
the drive safety function is active, and adjust if
necessary.

– Check the parameter setting of the safety card
(limit acceleration SLA 1), and adjust if neces-
sary.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands