SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 81

Page: 81 / 100

Fault list – safety technology

Fault 67 Safe communication

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 67.29

Description: F-PI data too short

Fault class: System error

Cause

Measure

F-profile variant needs more data than has been
received.

– Check the parameter setting of the safe control-
ler.

– Make sure that the slot of the HW configuration
accommodates the proper F‑module of the device
description file (GSDML file).

Subfault: 67.100

Description: Safety protocol message

Fault class: Message

Cause

Measure

Safety protocol signaled receipt of zero telegram
or connection not established correctly.

– Acknowledge the message.

– If the message occurs again, check the commu-
nication channel.

Subfault: 67.131

Description: CIP Safety™ configuration started

Response: No response

Cause

Measure

The user has activated the CIP Safety™ protocol. For information only.

Subfault: 67.140

Description: Restart by CIP Safety™

Response: FS – message

Cause

Measure

CIP Safety™ triggered a restart.

For information only.

Subfault: 67.141

Description: Error in safety stack control

Response: FS – message

Cause

Measure

Error in safety stack control (SSC) process.

For information only.

Subfault: 67.142

Description: Error in safety validator connection establishment engine

Response: FS – message

Cause

Measure

Error in SCE in safety open sequence in content
of receive data or in transmission of response
data.

For information only.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands