SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 67

Page: 67 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.30

Description: Permanent error acknowledgement

Fault class: Warning

Cause

Measure

Permanent acknowledgement signal detected.

Check the wiring.

Subfault: 66.31

Description: F-DI Permanent unlatching signal

Fault class: Warning

Cause

Measure

Permanent F-DI unlatching signal detected.

Make sure the F-DI latching signal is not present
permanently.

Subfault: 66.32

Description: Safety key error

Fault class: System error

Cause

Measure

Safety key defective, incompatible, or not con-
nected with safety card.

– Make sure that the safety key is plugged.

– If the fault occurs repeatedly, contact
SEW‑ EURODRIVE Service.

Subfault: 66.33

Description: Safety key data set error

Fault class: System error

Cause

Measure

Error while reading or writing data set on safety
key.

Transfer the data set to the safety card again us-
ing the "Assist CS.." tool.

Subfault: 66.34

Description: Data storage warning

Fault class: Warning

Cause

Measure

Warning or error message issued while storing
data.

– Reset the device to delivery state.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands