SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 65

Page: 65 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 65.6

Description: SLA 2 limit acceleration exceeded in negative direction of movement

Fault class: Warning

Cause

Measure

SLA 2 limit acceleration exceeded in negative di-
rection of movement.

– Check the acceleration of the application while
the drive safety function is active, and adjust if
necessary.

– Check the parameter setting of the safety card
(limit acceleration SLA 2), and adjust if neces-
sary.

Subfault: 65.10

Description: SLA maximum speed exceeded in positive direction of movement

Response: FS – warning

Cause

Measure

General maximum speed exceeded in positive di-
rection of movement while SLA is active.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed SLA 4), and adjust if necessary.

Subfault: 65.11

Description: SLA maximum speed exceeded in negative direction of movement

Response: FS – warning

Cause

Measure

General maximum speed exceeded in negative
direction of movement while SLA is active.

– Check the maximum speed of the application
while the drive safety function is active, and ad-
just if necessary.

– Check the parameter setting of the safety card
(maximum speed SLA 4), and adjust if necessary.

2.15

Fault 66 Safety-related fault

Subfault: 66.1

Description: Data storage problem during firmware update

Fault class: Warning

Cause

Measure

Data storage problem during firmware update.

If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands