SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 91

Page: 91 / 100

Fault list – safety technology

Fault 70 Safe brake system

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 70.7

Description: Safe brake test aborted. Maximum travel distance against the direction of movement
error.

Fault class: Warning

Cause

Measure

Maximum travel distance exceeded against the
direction of movement.

– Choose a sufficiently long maximum travel sec-
tion (travel section > retraction di posi-
tional tolerance).

– Check the direction of movement and correct, if
necessary.

– Check the settings for direction of rotation re-
versal and adjust, if necessary.

– Make sure that the movement can be per-
formed and that the drive does not slip.

Subfault: 70.9

Description: Safe brake test aborted. Error, clearing distance exceeded.

Fault class: Warning

Cause

Measure

The deviation of the actual clearing distance is
greater than permitted in the setting

Positional tol-

erance for clearing distance

– Check the settings of the basic unit and adjust,
if necessary.

– Check the encoder setting in the "Assist CS.."
parameterization tool and correct if necessary.

– Check the value of the parameter

Positional tol-

erance for clearing distance

, and increase, if nec-

essary.

– Make sure that the basic unit can deliver
enough power.

Subfault: 70.10

Description: Safe brake test aborted. Error FCB 23.

Fault class: Warning

Cause

Measure

FCB with higher priority than FCB 23 activated in
the basic unit.

Do not activate an FCB in the basic unit with a
higher priority than FCB 23 while the safe brake
test is running.

Subfault: 70.11

Description: Safe brake test aborted. Communication error with the basic unit.

Fault class: Warning

Cause

Measure

Timeout error in communication with basic unit.

– Repeat the brake test.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands