SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 20

Page: 20 / 100

Fault list – safety technology

Fault 14 Encoder 2

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 14.66

Description: No position code visible

Response: FS – warning

Cause

Measure

Optical encoder cannot decode valid barcode/
matrix code in field of view.

– Check the code tape for damage (e.g. gaps,
covering, contamination, reflecting materials, or
ambient light sources).

– Check the optical system of the encoder for
damage or dirt.

– Check diagnostic data indicating faulty as-
sembly.

– Check the encoder for proper mounting, such
as distance to the code tape, lateral offset or
twisting.

– To make the system more robust, increase the
value of the "Threshold for tolerated faults – PXV
encoder".

– If the fault occurs repeatedly, replace the en-
coder and send it to SEW‑EURODRIVE together
with the fault number. For further support, contact
SEW‑EURODRIVE Service.

Subfault: 14.67

Description: SSI encoder – warning

Response: FS – warning

Cause

Measure

SSI encoder signaled a warning.

– Check the startup parameters.

– Check the settings at the SSI encoder.

– Check the wiring.

– Check interference sources (light beam inter-
rupted, reflector, signal cables, etc.).

– Replace the encoder.

INFORMATION

In "Emergency mode" manual mode, you can
move the drive even if the external position en-
coder is faulty.

Subfault: 14.68

Description: Internal fault – overflow

Response: FS – warning

Cause

Measure

Overflow detected during internal calculation.

Adjust startup parameters, such as numerator
scaling/denominator scaling.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands