SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 75

Page: 75 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.97

Description: Referencing data incompatible

Response: FS – warning

Cause

Measure

Referencing data incompatible.

Perform a new referencing.

Subfault: 66.98

Description: Referencing data inconsistent

Response: FS – warning

Cause

Measure

Referencing data inconsistent.

Perform a new referencing.

Subfault: 66.99

Description: Error reading referencing data

Response: FS – system error

Cause

Measure

Error reading referencing data.

– Switch the device off and on again.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW-EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

Subfault: 66.100

Description: Power-on signal

Fault class: Message

Cause

Measure

Power-on signal

For information only.

Subfault: 66.101

Description: Acknowledgement message

Fault class: Message

Cause

Measure

All error messages that can be acknowledged are
reset.

For information only.

Subfault: 66.110

Description: Fault history overflow

Fault class: Message

Cause

Measure

Overflow (data loss) in fault history.

For information only.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands