SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 82

Page: 82 / 100

Fault list – safety technology

Fault 67 Safe communication

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 67.143

Description: Error in safety validator connection establishment engine

Response: FS – message

Cause

Measure

Error in SCE in safety close sequence in content
of receive data or in transmission of response
data.

For information only.

Subfault: 67.144

Description: Error in safety message router object

Response: FS – message

Cause

Measure

Error in SCE while receiving or transmitting an
explicit message.

For information only.

Subfault: 67.145

Description: Error in safety supervisor object

Response: FS – message

Cause

Measure

Error in the safety supervisor object (SSO):

– In the communication connection to the fieldbus
card

– In the safety open process

– In the Propos Apply TUNID service

For information only.

Subfault: 67.146

Description: Error in safety validator object

Response: FS – message

Cause

Measure

Error in the Safety Validator Object (SVO) in the
content of the I/O data received message.

For information only.

Subfault: 67.147

Description: Error in safety validator client object

Response: FS – message

Cause

Measure

Error in the Safety Validator Client Object (SVC).
The TCOO message was received with incorrect
ping status.

For information only.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands