SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 46

Page: 46 / 100

Fault list – safety technology

Fault 61 Safe digital output

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 61.72

Description: F-DO 01 Inductive load

Fault class: Output fault

Cause

Measure

Inductance of load connected to safe digital out-
put F-DO 01 too large, or no freewheeling diode
present.

Check the external wiring at safe digital output
F‑DO 01:

– If the load has an inductance, make sure that a
freewheeling diode is present.

– Check the freewheeling diode for proper func-
tioning.

Subfault: 61.81

Description: F-DO 00 Excessive cyclic switching

Fault class: Output fault

Cause

Measure

Failed to complete self-tests at safe digital output
F-DO 00 because of excessive cyclic switching.

Make sure that safe digital output F-DO 00 is
open or closed at least once for at least
2 seconds within 60 seconds.

Subfault: 61.82

Description: F-DO 01 Excessive cyclic switching

Fault class: Output fault

Cause

Measure

Failed to complete self-tests at safe digital output
F-DO 01 because of excessive cyclic switching.

Make sure that safe digital output F-DO 01 is
open or closed at least once for at least
2 seconds within 60 seconds.

Subfault: 61.87

Description: F-DO 00 Undervoltage DC 24 V during diagnostics

Fault class: Output fault

Cause

Measure

Undervoltage of DC 24 V supply voltage detected
during diagnostics of safe digital output F‑DO 00.

– Check the DC 24 V supply voltage (permitted
voltage range, voltage dips).

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands