SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 68

Page: 68 / 100

Fault list – safety technology

Fault 66 Safety-related fault

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 66.35

Description: Data storage plausibility check failed

Fault class: Critical fault

Cause

Measure

Values of data storage do not match expected
values.

– Switch the device off and on again.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW‑EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

Subfault: 66.36

Description: Faulty hardware ID

Fault class: Critical fault

Cause

Measure

Hardware defective.

Replace the safety card and send it together with
the fault number to SEW‑EURODRIVE. For fur-
ther support, contact SEW‑EURODRIVE Service.

Subfault: 66.38

Description: Faulty application parameter setting

Fault class: System error

Cause

Measure

Faulty application parameters read from data
memory.

Transfer the data set to the safety card again us-
ing the "Assist CS.." tool.

Subfault: 66.39

Description: Faulty data from safety key

Fault class: System error

Cause

Measure

Faulty data read from safety key.

Transfer the data set to the safety card again us-
ing the "Assist CS.." tool.

Subfault: 66.40

Description: Error saving application parameters

Fault class: System error

Cause

Measure

Error saving application parameters.

Transfer the data set to the safety card again us-
ing the "Assist CS.." tool.

Subfault: 66.41

Description: Error saving key

Fault class: System error

Cause

Measure

Error saving key to safety key.

Transfer the data set to the safety card again us-
ing the "Assist CS.." tool.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands