SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 16

Page: 16 / 100

Fault list – safety technology

Fault 14 Encoder 2

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 14.21

Description: SSI encoder – fault

Response: FS – warning

Cause

Measure

SSI encoder detected a fault.

– Check the startup parameters.

– Check the settings at the SSI encoder.

– Check the wiring.

– Check interference sources (light beam inter-
rupted, reflector, signal cables, etc.).

– Replace the encoder.

INFORMATION

In "Emergency mode" manual mode, you can
move the drive even if the external position en-
coder is faulty.

Subfault: 14.23

Description: Internal fault

Response: FS – warning

Cause

Measure

Encoder signaled internal fault.

INFORMATION

The encoder fault code is displayed in the "In-
ternal" parameter in the parameter group [Diag-
nostics] > [Fault memory T.] in MOVISUITE

– Check the wiring.

– Check interference sources (light beam inter-
rupted, reflector, signal cables, etc.).

– Replace the encoder.

INFORMATION

In "Emergency mode" manual mode, you can
move the drive using the motor encoder even if
the external position encoder is faulty.

Subfault: 14.50

Description: Safety card encoder fault

Response: FS – encoder fault

Cause

Measure

Encoder fault detected on safety card.

– Check the wiring.

– Check interference sources.

– Apply the shield of the encoder cable over a
large area.

– Check the encoder.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands