SEW-Eurodrive MOVI-C MOVISAFE CS A Series Manual Download Page 30

Page: 30 / 100

Fault list – safety technology

Fault 15 Encoder 3

Manual – Fault Descriptions MOVISAFE

CS..A

Subfault: 15.69

Description: Invalid HIPERFACE

communication

Response: FS – warning

Cause

Measure

Failure to establish connection with encoder.

– Acknowledge the encoder fault in the basic
device.

– Check the voltage supply.

– Check interference sources (e.g. from the area
of EMC).

– Check the wiring.

INFORMATION

In "Emergency mode" manual mode, you can
move the drive using the motor encoder even if
the external position encoder is faulty.

Subfault: 15.70

Description: Error detecting low level

Response: FS – warning

Cause

Measure

Fault detected while sensing low level.

– Check the wiring.

– Check the encoder.

– If the fault occurs repeatedly, replace the safety
card and send it together with the fault number to
SEW-EURODRIVE. For further support, contact
SEW‑EURODRIVE Service.

INFORMATION

In "Emergency mode" manual mode, you can
move the drive using the motor encoder even if
the external position encoder is faulty.

27799182/EN – 10/2022

Summary of Contents for MOVI-C MOVISAFE CS A Series





































































































Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands

SEW-Eurodrive MOVI-C MOVISAFE CS A Series, Manual

Search results

Summary of Contents for MOVI-C MOVISAFE CS A Series

Reviews:

Related manuals for MOVI-C MOVISAFE CS A Series

Brands by name

Popular brands