Rohde & Schwarz FPC Series, User Manual

Page: 396 / 419

Function Reference
R&S
®
FPC
393 User Manual 1178.4130.02 ─ 07
Center Freq Step Size
See "Defining a frequency step size" on page 94.
Remote command:
[SENSe:]FREQuency:CENTer:STEP
on page 248
Frequency Offset
See "Defining a frequency offset" on page 95.
Remote command:
[SENSe:]FREQuency:OFFSet
on page 250
20.7.3 Amplitude Menu
Access : [Ampt]
Reference Level .......................................................................................................... 393
Deviation per Division ................................................................................................. 393
Ref Position .................................................................................................................393
Preamplifier ................................................................................................................. 393
Attenuator ....................................................................................................................393
Reference Level
See "Defining a reference level" on page 99.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel
on page 253
Deviation per Division
See "Adjusting the scale of the y-axis" on page 167.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:PDIVision
on page 321
Ref Position
See "Defining the position of the reference (ASK signals)" on page 167.
(Only for ASK measurements.)
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RPOSition
on page 321
Preamplifier
See "Turning the preamplifier on and off" on page 103.
Remote command:
INPut:GAIN:STATe
on page 256
Attenuator
See "Defining RF attenuation" on page 101.
Function Reference: Digital Demodulation