manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 94

The Spectrum Application

R&S

®

FPC

91

User Manual 1178.4130.02 ─ 07

4. Select the "Save" softkey to store the spectrogram.

Now that you have saved the spectrogram, you can replay it any time you want.
The number of spectrograms that you can store on the R&S

 

FPC internal memory

depends on the other datasets that are currently on the R&S

 

FPC.

Playback of a spectrogram

If you have recorded a spectrogram and have saved it in internal memory or a memory
stick, you can view the results of that measurement later.

1. Press the "Meas" key to open the measurement menu.

2. Select the "Measurement Mode" menu item.

3. Select the "Spectrogram Playback" menu item.

The R&S

 

FPC enters the spectrogram playback mode. In playback mode, it no lon-

ger records any data. Only the data that has been recorded already is displayed.

Restoring a spectrogram

You can restore a spectrogram that you recorded some other time and saved in the
internal memory of the R&S

 

FPC or on a memory stick.

1. Press the "Meas" key to open the measurement menu.

2. Select the "Recall" menu item.

The R&S

 

FPC opens the file manager.

3. Select the file you need. The file extension for spectrogram data is 

*.spm

.

The R&S

 

FPC loads the spectrogram and shows the data in the display.

Basically, you can do the same things in spectrogram playback mode as in the
spectrogram recording mode, for example customize the display to your needs.

In addition to that functionality, it is possible to view not only the spectrum that
belongs to the currently selected spectrogram frame, but also the spectrums of all
frames that have been recorded.

Working with time lines in playback mode

To find a particular point in time and display the corresponding spectrum, you can use
two time lines.

When you enter the playback mode, the R&S

 

FPC displays two time lines in the spec-

trogram.

Both time lines (T1 and T2) correspond to an absolute time value, whose position
refers to the most recent time frame (top of the diagram). Both time lines are positioned
on the most recent spectrogram line at the top of the result display.

You can now select a specific spectrogram frame that is in the memory of the
R&S

 

FPC.

1. Press the "Meas" key to open the measurement menu.

Measurements and Result Displays

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands