manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 67

Measurement Wizard

R&S

®

FPC

64

User Manual 1178.4130.02 ─ 07

Ending a measurement sequence is possible when you turn on "Allow to skip
measurements and finish wizard sequence" in the "Wizard Set" editor of the
R&S

 

InstrumentView software.

● "Cancel"

Aborts the measurement sequence. The results of finished measurements are
lost.

When all measurements of the sequence are done, the R&S

 

FPC shows a corre-

sponding message.

Figure 13-6: On screen information that all measurements are done

When you have finished all measurements that are part of the measurement
sequence, the R&S

 

FPC asks you if you want to save the measurement results.

9. Select the "Save Result" menu item to save the results.

If you do not want to keep the results, you can discard the results with the "Discard
Result" menu item.

Tip: 

Limited internal memory. If you have to store the results on the internal mem-

ory, make sure that it has enough space left to store them. Else the results might
get lost. If the space is not enough, you can delete old data with the file manager.
For more information, see 

"Using in the file manager"

 

on page 47.

The results for a measurement set consist of several files, each file corresponding
to one of the measurements. For easy evaluation, the R&S

 

FPC includes the name

of the measurement as defined in the wizard dialog or R&S

 

InstrumentView in the

file name.
All result files that belong to a measurement set are stored in the same directory.
The directory is named after the measurement name and site. The syntax is 'site-
name_measurement_#'
The R&S

 

FPC adds numbers in ascending order to files as well as directories if you

perform a measurement or measurement set more than once.

Evaluating results

The R&S

 

InstrumentView software provides functionality to evaluate results and com-

pile measurement reports. However, before you can start to evaluate the results you
have to download the results to your computer.

1. Open the "File Transfer" dialog box in the R&S

 

InstrumentView software ("Instru-

ment" > "File Transfer").

2. Select the "Wizard Sets" folder on both the R&S

 

FPC (left pane) and the PC (right

pane).

3. Select the measurement set you would like to transfer.

4. Transfer the file to the R&S

 

FPC with the ">>" button.

Alternatively, you can use a memory stick to access a measurement set on the
R&S

 

FPC.

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands