manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 39

Firmware Options

R&S

®

FPC

36

User Manual 1178.4130.02 ─ 07

Follow this link if you have purchased an unregistered license and want to reg-
ister it.

–

"Unregister License"
Follow this link if you have installed a portable license. Portable licenses can be
used with several device IDs. However, you have to unregister it on one device
before you can use it on another.

–

"Move Portable License"
Follow this link if you want to move a portable license. Moving a portable
license is possible without unregistering the license.

–

Opens an online help of the corresponding topic.

●

The second area provides hints on using the license manager when you move the
mouse over one of the options.

After you have followed one of the links, follow the instructions displayed in the web
browser. If you encounter any issues during the licensing procedure, you can access
the online help at any time with the   icon. The online help contains an extensive
description of all functionality that the license manager features.

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands