Rohde & Schwarz FPC Series, User Manual

Page: 386 / 419

Function Reference
R&S
®
FPC
383 User Manual 1178.4130.02 ─ 07
Trace Mode
See "Selecting the trace mode" on page 116.
(Supported trace modes: clear / Write, max hold, min hold and average.)
Remote command:
Trace mode:
DISPlay<n>[:WINDow]:TRACe<t>:MODE
on page 267
# of averages:
[SENSe:]SWEep:COUNt
on page 270
Detector
See Chapter 15.6, "Trace Configuration" , on page 144.
(Supported detectors: max peak, quasi peak, average and RMS.)
Remote command:
Detector:
[SENSe:]DETector<t>[:FUNCtion]
on page 300
Memory
See "Working with memory traces" on page 117.
Remote command:
CALCulate<n>:MATH<t>:COPY:MEMory
on page 266
Trace
▶
Memory
See "Working with memory traces" on page 117.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe]
on page 267
Trace Style: Lines
See "Selecting the trace style" on page 137.
Remote command:
DISPlay[:WINDow]:TRACe:STYLe
on page 301
Trace Style: Polygon
See "Selecting the trace style" on page 137.
Remote command:
DISPlay[:WINDow]:TRACe:STYLe
on page 301
20.5.7 Lines Menu
Access : [Lines]
Show Limit Lines ......................................................................................................... 383
Upper Limit ..................................................................................................................384
Lower Limit ..................................................................................................................384
Select Trace <x> ......................................................................................................... 384
Audio Beep ..................................................................................................................384
Show Limit Lines
See "Hiding a limit line" on page 132.
Function Reference: Receiver Application