Rohde & Schwarz FPC Series, User Manual

Page: 373 / 419

Function Reference
R&S
®
FPC
370 User Manual 1178.4130.02 ─ 07
Attenuator ....................................................................................................................370
Impedance .................................................................................................................. 370
Transducer .................................................................................................................. 371
Reference Level
See "Defining a reference level" on page 99.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel
on page 253
Range / Ref Position
See "Defining a display range" on page 104, "Defining the position of the reference
level" on page 100 and "Defining a reference offset" on page 100.
Remote command:
Scale (y-axis):
DISPlay<n>[:WINDow]:TRACe<t>:Y:SPACing
on page 252
Range (y-axis):
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]
on page 252
Range (automatic):
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:ADJust
on page 253
Reference position:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RPOSition
on page 254
Reference offset:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:RLEVel:
OFFSet
on page 254
Auto Range
See "Defining a display range" on page 104.
Remote command:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:ADJust
on page 253
Unit
See "Selecting the display unit" on page 103.
Remote command:
UNIT<n>:POWer
on page 258
Preamplifier
See "Turning the preamplifier on and off" on page 103.
Remote command:
INPut:GAIN:STATe
on page 256
Attenuator
See "Defining RF attenuation" on page 101.
Remote command:
Attenuation:
INPut:ATTenuation
on page 255
Automatic attenuation:
INPut:ATTenuation:AUTO
on page 255
Attenuation mode:
INPut:ATTenuation:MODE
on page 256
Impedance
See "Selecting the input impedance" on page 98.
Function Reference: Spectrum Application