manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 29

Operation

R&S

®

FPC

26

User Manual 1178.4130.02 ─ 07

Alternatively, you can establish a connection via USB in the "USB" tab of the "Con-
nection Manager".

5. Select "Instrument" > "Remote Display".

The software shows a live simulation of the R&S

 

FPC, including all keys available

on the front panel.

Everything you do in the remote desktop application is also done on the connected
R&S

 

FPC.

For a comprehensive description of the R&S InstrumentView software, refer to its
user manual.

Tip: 

Lab display. The lab display allows you to access several instruments at the

same time via the remote desktop. For more information, refer to the documenta-
tion of the R&S

 

InstrumentView software.

Remote desktop (R&S MobileView)

R&S MobileView is an app that allows you to remote control the R&S

 

FPC from a tab-

let or smartphone. It basically works like the remote desktop application built into the
R&S

 

InstrumentView software.

You can download the app from the Google Play Store (Android based devices) or the
AppStore (iOS devices). A search for "Rohde Schwarz MobileView" should find the
app.

1. Start the R&S

 

FPC.

2. Configure your tablet or phone as a hotspot for an ad-hoc connection (usually in

the phone settings).

3. Connect the R&S

 

FPC to the mobile device.

a) Press the "Setup" key to open the instrument setup menu.
b) Select "WiFi": "On" to turn on the Wi-Fi functionality.
c) Select the "Connect" menu item to start a search for Wi-Fi networks in the

area.
The R&S

 

FPC starts a search for all Wi-Fi networks it can find (mobile devices,

routers etc.).

d) Select the network you want to connect to.
e) Enter the password of the network with the alphanumeric keys. The network

password should be displayed in the hotspot settings of the mobile device.
The R&S

 

FPC establishes the connection.

4. Start the R&S MobileView app on your mobile device.

The app shows a list of all R&S

 

FPC devices that are connected to the hotspot.

5. Select the R&S

 

FPC you want to connect to.

The app shows a live simulation of the R&S

 

FPC, including all keys available on

the front panel.

Everything you do in the app is also done on the connected R&S

 

FPC.

Remote Operation

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands