manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 100

The Spectrum Application

R&S

®

FPC

97

User Manual 1178.4130.02 ─ 07

Defining a start and stop frequency

Defining a start a stop frequency is best suited for example for measurements on har-
monics or signals whose exact frequency is unknown. When you define a start and
stop frequency, the center frequency is automatically adjusted to be in the center of
start and stop frequency.

1. Press the "Freq" key to open the frequency menu.

2. Select the "Start Freq" menu item.

The R&S

 

FPC opens an input field to define the start frequency.

3. Enter a start frequency.

4. Select the "Stop Freq" menu item.

The R&S

 

FPC opens an input field to define the stop frequency.

5. Enter a stop frequency.

Tip: 

If you have entered a stop frequency that is outside the maximum frequency

range, the R&S

 

FPC sets the stop frequency to the possible maximum.

The R&S

 

FPC adjusts the horizontal axis according to your input, beginning with

the start frequency and ending with the stop frequency.
The label of the horizontal axis changes from "Center" and "Span" to "Start" and
"Stop".

14.3.3

 

Channel Tables

Working with channel tables

Almost all transmission systems divide their assigned frequency ranges into channels.
Each channel corresponds to a specific frequency. To keep the handling of such sys-
tems simple, you can use channel tables instead of entering frequencies manually.

The R&S

 

FPC already comes with an assortment of channel tables that you can use

without doing anything. If you want to test transmission standards that are not listed,
you can also create your own channel tables with the "Channel Table Editor" of the
R&S

 

InstrumentView software package. To use one of those, you just have to copy the

channel table to the R&S

 

FPC.

For more information, refer to the R&S

 

InstrumentView user manual.

1. Press the "Freq" key to open the frequency menu.

2. Select the "Frequency Mode" menu item to open the frequency mode.

3. Select the "Channel Downlink" or "Channel Uplink" menu item.

The R&S

 

FPC opens a dialog to select a channel table.

4. Select one of the available channel tables.

Frequency Configuration

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands