manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 89

The Spectrum Application

R&S

®

FPC

86

User Manual 1178.4130.02 ─ 07

The spectrogram result display is filled with new lines until you change a measure-
ment setting.
When you change a setting (for example the center frequency), the spectrogram
clears and starts to fill again.

4. You can also clear the spectrogram manually. Press the "Meas" key.

5. Select the "Clear" menu item.

Resetting the spectrogram

The R&S

 

FPC clears the spectrogram result display when you change a measurement

setting, for example one of the frequency settings or the resolution bandwidth.

You can also clear it deliberately.

1. Press the "Meas" key to open the measurement menu.

2. Select the "Clear" menu item.

The R&S

 

FPC deletes the current spectrogram data and starts a new recording.

Displaying the spectrogram in full screen

By default, the spectrogram takes half of the diagram area, with the upper part showing
the results of the current sweep as a line trace. You can view more of the signal history
by displaying the spectrogram in full screen mode.

1. Press the "Meas" key to open the measurement menu.

2. Select the "Full Screen" menu item.

The R&S

 

FPC now uses the full diagram area of the screen for the spectrogram.

The number of lines in the spectrogram and therefore the displayed time period
more than doubles.

Note: 

It can, however, be necessary that the spectrum result display is still visible

to evaluate measurement results. For this purpose, the spectrogram has an (invisi-
ble) scrollbar that you can use to scroll up and down the spectrogram to the frame
that you would like to see.

Scrolling through the spectrogram

As more and more lines are added to the spectrogram, older data is moved down until
it disappears from the visible spectrogram. The data itself is still available, but you
have to scroll through the spectrogram to see those parts of the spectrogram.

Arrows on the right side of the spectrogram indicate that more data than is visible on
the screen is available.

► Press the "Up" or "Down" cursor keys.

The R&S

 

FPC scrolls through the spectrogram history.

The symbols on the right side of the spectrogram indicate the position of the spec-
trogram part currently displayed on the screen.
● A single down arrow in the right lower corner of the spectrogram indicates that

the uppermost frame still represents the most recently recorded trace.

Measurements and Result Displays

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands