manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 38

Firmware Options

R&S

®

FPC

35

User Manual 1178.4130.02 ─ 07

This page contains three areas.

●

The first area shows the details of the connected device, including the device ID
and the IP address.

●

The second area provides functionality to install and activate licenses.

–

"Install Registered License Keys And Activate License"
Follow this link if you have purchased a registered license. Registered licenses
only work in a combination with a specific device ID.

–

"Register License, Install License Keys and Activate Licenses"
Follow this link if you have purchased an unregistered license. Unregistered
licenses are not linked to a specific device ID.

–

"Reboot Device"
Follow this link to reboot the R&S

 

FPC.

–

Opens an online help of the corresponding topic.

●

The third area provides hints on using the license manager when you move the
mouse over one of the options.

The R&S License Manager also provides functionality to managed licenses of options
that you have already installed on a R&S

 

FPC.

► Select the "Manage Licenses" button.

The web browser opens another part of the R&S

 

License

 

Manager. In this part of

the R&S

 

License

 

Manager, you can manage licenses already installed on your

R&S

 

FPC.

This page contains two areas.

●

The first area provides functionality to manage licenses.
–

"Register Licenses"

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands