manualshive.com logo in svg

Rohde & Schwarz FPC Series, User Manual

Share
Download
Rohde & Schwarz FPC Series User Manual Download Page 126

The Spectrum Application

R&S

®

FPC

123

User Manual 1178.4130.02 ─ 07

2. Select the "Marker Display" menu item.

3. Select the input mode you prefer ("Frequency Display" or "Channel Display").

When you select the channel display, enter a channel number instead of a fre-
quency to position the marker.

14.9.2

 

Automatic Marker Positioning

The R&S

 

FPC has several useful tools to position markers automatically (for example

on a peak level) and tools that change instrument settings based on the current marker
position.

Selecting a marker

If you have more than one active marker, you have to select the marker you want to
move first.

1. Press the "Mkr

→

" key to open the marker positioning menu.

2. Select the "Select Marker" menu item until the marker you want to move is

selected.
You can see which marker is selected by the frame around the marker in the
marker list and a frame around the marker icon in the diagram.

Positioning markers automatically

1. Press the "Mkr

→

" key to open the marker positioning menu.

Tip: 

Marker positioning functions are only available if at least one marker is active.

If no marker or delta marker is active, they are not applicable.

2. Select the menu item of the positioning function you want to use.

● "Set To Peak"

Positions the active marker or delta marker on the highest level value of the
trace.

● "Set To Next Peak"

Positions the active marker or delta marker on the next highest level value of
the trace, relative to its current position.

● "Set To Minimum"

Positions the active marker or delta marker on the lowest value of the trace.

● "All Marker to Peak"

Places all existing markers or delta markers on the highest level values of the
trace. This is done hierarchical whereas marker 1 is placed on the highest
level, marker 2 is placed on the second highest level, and so on.

● "Center = Marker Freq"

Matches the center frequency to the frequency of the selected marker or delta
marker.

● "Ref Level = Marker Level"

Matches the reference level to the level value of the selected marker or delta
marker.

Marker Configuration

Summary of Contents for FPC Series




































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands