Inspecting with the Labeling Inspection Item
150
FQ2 User’s Manual
Changing the Label Detection Conditions
You can fill in the labels detected through color extraction or binary conversion to perform a stable extraction of
the labels and their characteristics or to mark only labels inside the measurement region for inspection.
[Inspect]
−
[Inspection]
−
[Labeling]
−
[Modify]
−
[Details] Tab Page
−
[Meas. Parameter]
1
To enable filling up holes, press [Filling up holes]
and select [Yes].
2
To extract an image, press [Extract image] and select
[Yes].
Parameter
Setting
Description
Filling up holes
Yes
No (default)
Sets how to process areas surrounded by the specified color. If [Yes]
is set, those areas are processed as the specified color.
Extract image
Yes
No (default)
Select this option if there are areas of the specified color inside the
measurement region that you do not want to measure. If [Yes] is set,
all areas outside the measurement region are cut out as the specified
color.
Inp
u
t Image
Filled Image
Meas
u
rement region
Yes
Yo
u
can find the position
and area of the center la
b
el
if yo
u
set the sort condition
to sort
b
y descending order
of area. Areas o
u
tside the
meas
u
rement region are set
to the color for meas
u
re-
ment.
Yo
u
need to kno
w
the
position and area of
this la
b
el.
Summary of Contents for FQ2 Series
