Omron FQ2 Series, User Manual

Page: 244 / 516

Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
242
FQ2 User’s Manual
Timing Chart
Output OR0 to OR31 signals are held until the next judgement output.
*1: The timing for updating the OR signal is when the measurement results are finalized, regardless of the output settings of the BUSY signal
(BUSY output conditions).
Settings
[In/Out]
−
[I/O setting]
−
[I/O setting]
−
[Output]
1
Press [OUT0].
2
Press [OR2 (Item 2 judgement)].
OR2 output signal was assigned to OUT0.
3
Assign the others in the following manner.
OUT1: OR5
OUT2: OR14
Adjusting the Judgement Output Timing
The output timing of the OR signal or OR0 to OR31 signals can be selected from two modes depending on the
external device.
Selecting the OFF Timing
• Level output (default)
The status of the output OR signal is held until the next OR signal is output.
OFF
O N
OFF
O N
OR1 signal
T u rned O N w hen indi v id u al
j u dgement is N G.
(OR o u tp u t: O N for N G)
OR0 signal
T u rned O N w hen indi v id u al
j u dgement is N G.
(OR o u tp u t: O N for N G)
Example:
O N w hile meas u rements are
b eing processed (depends
on BUSY o u tp u t conditions)
BUSY signal
TRIG signal
O N for 1 ms min.
Indi v id u al
j u dgement
*1
OFF
O N
OFF
O N
OFF
O N
N G OK
Held u ntil the next
j u dgement res u lt is o u tp u t
O v erall j u dgement
(OR o u tp u t: O N for N G)
OR signal
O N w hile meas u re-
ments are b eing
processed (depends
on BUSY o
u tp u t
conditions)
BUSY signal
TRIG signal O N for 1 ms min.