Omron FQ2 Series, User Manual

Page: 210 / 516

Logging Measurement Data and Image Data
208
FQ2 User’s Manual
7-6 Logging Measurement Data and Image Data
There are two ways to log data.
Recent results logging: Data is temporarily saved in memory inside the Sensor.
File logging: Large amounts of data are saved in SD cards or other external media.
The amounts and types of data that can be logged depend on the logging method that is used, as shown in the
following table.
*1 For recent results logging, the oldest data is overwritten when the maximum number of saved data items is exceeded.
*2 This limit is for one data item.
If more than one data item is logged at the same time, logging can be performed as long as the total number of data items in all logged
data is 32,000 or less.
Logging Procedure
Use the following procedure to log data.
Logged data Logged quantity
Recent results logging
*1
File logging
Statistical data One value (The average value of the mea-
surement results in the collected measure-
ment data is continuously updated.) Not possible.
Measurement data 1,000 measurement values max.
*2
Up to the capacity of the external memory
Image data 20 images max.
Logging settings
(common settings for recent res u lts logging and file logging)
O u tp u t settings
(common settings for recent res u lts logging and file logging)
• Setting the File N ame for Logged Data
• Setting the Format for Sa v ing Meas u rement Data
Exec u tion of file logging
(Change to R u n Mode.) (Change to R u n Mode.)
• Ena b ling File Logging
• Starting and Stopping Logging
• Sa v ing Recent Res u lts Logging Data
• Deleting Logged Data
Ena b ling file logging
Exec u ting file logging.
• Setting Logging Conditions
• Selecting the Meas u rement Data To Log
Exec u tion of recent
res u lts logging
File logging: p. 209
Recent results logging: p. 214
p. 210
p. 211
p. 212
p. 212
p. 213
p. 216
p. 216