Omron FQ2 Series, User Manual

Page: 255 / 516

Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
FQ2 User’s Manual
253
8
Co
ntro
llin
g Operatio
n an
d Ou
tp
utti
ng Da
ta
with a Parall
el Con
nection
Save Data in Sensor
You can save the current settings (scene data and system data) in the Sensor.
Settings
[In/Out]
−
[I/O setting]
−
[I/O setting]
−
[Input]
−
[Input mode]
Press [Expand mode].
Wiring
Timing Chart
This function can be used in Run Mode only.
Color Signal State Description The signals shown at the left
are used.
Refer to the following
information for signal wiring.
2-4 Wiring: p. 42
Gray IN0 ON Command parameters for saving data to
the Sensor
Green IN1 OFF
Red IN2 OFF
White IN3 OFF
Purple IN4 OFF
Yellow IN5 ON Command input for saving data to the
Sensor
Orange OUT1 (BUSY) -- Processing in progress (default)
1 Turn ON IN0 and turn OFF IN1 to IN4.
2 Turn ON the IN5 signal while the
BUSY signal is OFF to save the data
in the Sensor.
Note
OFF
O N
Sa v ing data
in Sensor started.
Sa v ing data in
Sensor completed.
OFF
O N
BUSY
signal
I N 5 signal
O N for 1 ms min.
Allo w 5 ms min. and then
t u rn O N I N 5.
I N 0 to I N 4
signals