Omron FQ2 Series, User Manual

Page: 241 / 516

Controlling Operation and Outputting Data with the Sensor's Standard Parallel Connection
FQ2 User’s Manual
239
8
Co
ntro
llin
g Operatio
n an
d Ou
tp
utti
ng Da
ta
with a Parall
el Con
nection
Sample Ladder Program
The following sample program is used to input a IN5 signal to perform continuous measurements. Continuous
measurements will be started when W0.00 turns ON and stopped when W0.01 turns ON.
• I/O Signal Allocations
Signal Address
Output signals OUT1 (BUSY signal) CIO 0.01
Input signals IN0 CIO 1.08
IN1 CIO 1.09
IN2 CIO 1.10
IN3 CIO 1.11
IN4 CIO 1.12
IN5 CIO 1.15
MO V
#0000
Q:1
W 0.00
0000
#5
TMHH
SET
I N 5
T0000 OUT1
W 0.00
RSET
W 0.00
RSET
I N 5
W 0.01
RSET
W 0.00
Contin u o u s
meas u rement
command b it
Contin u o u s
meas u rement
command b it
BUSY signal
Contin u o u s
meas u rement
stop b it
W hen the contin u o u s meas u rement command
b it ( W 0.00) t u rns O N , the command
parameter for contin u o u s meas u rements
(00000) is o u tp u t to Q:1 (I N 0 to I N 4).
If the BUSY signal is OFF 5 ms after the
command parameter is o
u tp u t, the command
inp u t for contin u o u s meas u rements (I N 5) is
t u rned O N and contin u o u s meas u rements start
W hen the contin u o u s meas u rement stop b it
( W 0.01) t u rns O N , the command inp u t for
contin u o u s meas u rements (I N 5) is t u rned
OFF and contin u o u s meas u rements stop.