Omron FQ2 Series, User Manual

Page: 485 / 516

Specifications and Dimensions
FQ2 User’s Manual
483
Appe
ndi
ce
s
12
Sensor Data Units
Specifications
Table 1
*1: Do not allow the load current to exceed 50 mA. The output circuit may be damaged if the load current exceeds 50 mA.
Item Sensor Data Units
FQ-SDU1
@
Parallel Interface Sensor Data Unit (SDU10: NPN, SDU15: PNP)
FQ-SDU2
@
RS-232C Interface Sensor Data Unit (SDU20: NPN, SDU25: PNP)
I/O
specifi-
cations Parallel I/O SDU1
@
11 inputs (TRIG, RESET, IN0 to IN7, and DSA)
24 outputs (GATE, D0 to D15, ACK, RUN, BUSY, OR, ERROR, STGOUT, and SHTOUT)
SDU2
@
8 inputs (IN0 to IN5, TRIG, and RESET)
7 outputs (ACK, RUN, BUSY, OR, ERROR, STGOUT, SHTOUT)
RS-232C 1 channel, 115,200 bps max.
*FQ-SDU2
@
only.
Sensor interface FQ2-S3 connected with FQ-WU
@@@
): OMRON interface
*Number of connected Sensors: 1
Input specifications Refer to Table 2.
Output specifications
Rat-
ings Power supply voltage 21.6 to 26.4 VDC (including ripple)
Insulation resistance Between all DC external terminals and case: 0.5 M
Ω
min. (at 250 VDC)
Current consumption 2.5 A max. (FQ2-S
@@@@@@
-
@@@
+ FQ-SDU
@@
)
0.4 A max. (FQ2-S3
@
-
@@@
+ FQ-SDU
@@
)
0.1 A max. (for FQ-SDU
@@
)
Envi-
ron-
mental
immu-
nity Ambient temperature
range Operating: 0 to 50
°
C, Storage:
−
20 to 65
°
C (with no icing or condensation)
Ambient humidity
range Operating and storage: 35 % to 85 % (with no condensation)
Ambient atmosphere No corrosive gas
Vibration resistance
(destruction) 10 to 150 Hz, single amplitude: 0.35 mm, X/Y/Z directions, 8 min each, 10 times
Shock resistance
(destruction) 150 m/s
2
3 times each in 6 directions (up, down, right, left, forward, and backward)
Degree of protection IEC 60529 IP20
Materials Case: PC + ABS, PC
Size 62
×
90
×
65 (W
×
H
×
D) (Excluding connectors, DIN Track, and protrusions.)
Weight Approx. 150 g
Accessories Instruction Manual
Item NPN PNP
Input specifi-
cations ON: Shorted to 0 V, or 1.5 V max.
OFF: Open (leakage current: 0.1 mA max.) ON: Shorted to power supply voltage, or power supply volt-
age
−
1.5 V max.
OFF: Open (leakage current: 0.1 mA max.)
Output speci-
fications
*1
NPN open collector
30 VDC, 50 mA max., residual voltage: 1.2 V max. PNP open collector
30 VDC, 50 mA max., residual voltage: 1.2 V max.