Menu Tables
416
FQ2 User’s Manual
I/
O s
e
tt
in
g
I/
O s
e
tt
in
g
O
ut
put Output period
Sets the period for outputting measure-
ment results. (Only when the FQ-SDU1
@
is connected.)
2.0 to 5,000.0 ms
10.0 ms (default)
System
GATE ON delay
Sets the time from when the result is out-
put to the parallel interface until the
GATE signal turns ON.
(Only when the FQ-SDU1
@
is con-
nected.)
1.0 to 1,000.0 ms
1.0 ms (default)
System
Output time
Sets the time to turn ON the GATE sig-
nal.
(Only when the FQ-SDU1
@
is con-
nected.)
1.0 to 1,000.0 ms
5.0 ms (default)
System
Timeout
Sets the timeout time for output control.
(Only when the FQ-SDU1
@
is con-
nected.)
0.5 to 120.0 s
10.0 s (default)
System
Number of delay Set the number of times to ignore the
TRIG signal turning ON between when
the TRIG signal turns ON and the mea-
surement results are output.
(Only when the FQ-SDU1
@
is con-
nected.)
1 to 15 (default)
System
ACK signal ON
period
Sets the output time of the normal execu-
tion completion signal for parallel com-
mands.
(Only when the FQ-SDU is connected.)
1.0 to 1,000.0 ms
5.0 ms (default)
System
Output polarity
Sets the ON/OFF polarity for all of the
output signals
(Only when the FQ-SDU is connected.)
Positive(default), Negative
System
Input
Input mode
Specifies whether to use functions other
than scene switching for external parallel
commands.
Standard mode (default) or Expanded
mode
System
Menu command
Description
Setting range
Data
Refer-
ence
Summary of Contents for FQ2 Series
