background image

Conventions used in this Manual

This manual is based on the assumption that both the camera and 

camera flash’s power switches are powered on.

Reference page numbers are indicated by “p.**”.

The following alert symbols are used in this manual:

    The Caution symbol indicates a warning to prevent shooting problem.

    The Note symbol gives supplemental information.

'PSFXPSE

8BSOJOH

Thank you for purchasing this product.
This TT685IIC camera flash applies to Canon EOS series cameras 
and is compatible with E-TTL II autoflash. With this E-TTL II 
compatible flash, your shooting will become simpler. You can 
easily achieve a correct flash exposure even in complex 
light-changing environments. This camera flash features:

Approx. GN60 (m ISO 100, @200mm), 81 steps from 1/1 to 1/128.

Fully support Canon E-TTL II camera flash. Workable as 

Transmitter or Receiver unit in a wireless flash group.

Use dot-matrix LCD panel to make clear and convenient 

operations.

With built-in 2.4GHz wireless remote system to support 

transmitting and receiving.

Provided multiple functions, include HSS (up to 1/8000s), FEC, 

FEB, etc.

Stable consistency and color temperature with good even 

lighting.

Support with firmware upgrade.

Always keep this product dry. Do not use in rain or in damp 
conditions.
Do not disassemble. Should repairs become necessary, this 
product must be sent to an authorized maintenance center.
Keep out of reach of children.
Stop using this product if it breaks open due to extrusion, falling 
or strong hit. Otherwise, electric shock may occur if you touch 
the electronic parts inside it.
Do not fire the flash directly into the eyes (especially those of 
babies) within short distances. Otherwise visual impairment 
may occur.
Do not use the flash unit in the presence of flammable gases, 
chemicals and other similar materials. In certain circumstance, 
these materials may be sensitive to the strong light emitting 
from this flash unit and fire or electromagnetic interference may 
result.
Do not leave or store the flash unit if the ambient temperature 
reads over 50

. Otherwise the electronic parts may be 

damaged.
Turn off the flash unit immediately in the event of malfunction.

*3GXQ/<

*3GXQ//

*3GXQ//

*

*

*

*

3

3

5D Mark III

5D Mark 

6D

7D 60D

50D

30D 600D

500D

*

II

-  25  -

-  26  -

Thinklite TTL Camera Flash

Godox

TT685IIC

Summary of Contents for TT685IIC















Reviews: