Muratec mfx-2200 User Manual Download Page 345

Page: 345 / 382

9-19

Maintenance

and

Troubleshooting

Message

Status and countermeasure

Error codes

Check ID number

1. Lower 4 digits of the fax number registered by the

destination do not match with those of the entered
number.

Check the ID number.

2. The fax number is not registered by the other

party.

Call the other party and ask them to confirm the
correct fax number.

T.2.2

Check passcode

Ask the other party to check the machine.
Ask the other party to check the passcode.

T.2.2

Check condition of
remote fax

Call the other party and ask them to check the

mode, fax number, status of their machine.

T.1.1, T.2.1
T.2.2, T.2.3
T.5.1, T.5.2
T.8.1, R.8.1

Check the received
documents

Call the other party and ask them to check the

operating status of their machine.

T.4.2

Repeat transmission

1. The document may not be read properly.

Resend the document.

2. The phone line may have a problem.

Resend the document.

T.3.1

T.4.1
T.5.3

Line is busy

The document was not successfully transmitted to
the destination, despite having redialed the preset
number of times.

Enter the destination fax number and transmit

again. If this message appears again, call the other
party to ask them to check the status of their
machine.

D.0.2

Dialing number is not
set

Re-set the speed dial and resend the document.

D.0.6

Stopped

Communication stopped. Restart the operation.

D.0.3
T.1.4
R.1.4

DB2-90290-60.indb 19

2007/02/02 12:34:23

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands