![background image](http://html1.mh-extra.com/html/muratec/mfx-2200/mfx-2200_user-manual_1857442349.webp)
9-23
9
Maintenance
and
Troubleshooting
Troubleshooting
Displayed messages
An operation mistake or a device error is displayed on the screen. Following a
displayed message, take an appropriate action.
Error message
Countermeasure
Reference
page
30 locations can be input
You tried to directly enter 30 or more destinations
using the numeric keys for the broadcast transmission.
4-3
ADF is unavailable
Set doc. on the FBS glass.
A document is loaded on the ADF for the series copy.
This setting is available using the document glass only.
Load the document on the document glass.
2-19
ADF used in the
command.
Real time transmission has been reserved. Wait until
the real time transmission ends or cancel the command
for the real time transmission.
3-14
Already Stored.
The same number has been already entered.
—
Auto size detection failed! When the paper selection or the magnification is set to
auto, a document size was not automatically detected.
Press <Start> to copy the paper displayed on the
screen in 100% maginification.
Press <Stop> to cancel copying.
2-2
Box In Use
An F-code box is now used for communicating, or
printing etc.
—
Call for service
A failure occurs inside the machine. Please contact
your authorized Muratec dealer.
9-35
Cannot combine with __
You are trying to combine the functions which cannot
be set simultaneously.
2-50
Carriage Error
A scanner device has a failure. Please contact your
authorized Muratec dealer.
9-35
Casset.1 has been selected If you set the magnification setting to auto, or set the
advanced copy that requires the auto magnification
with the paper selection set to auto, the 1st cassette
will be selected with priority.
—
Cassette paper size error
Check direction and paper
size
When printed on the cassette paper, the paper size
you specified did not match the actual paper size. Or, a
paper jam may occur because more than one sheets of
paper are fed. Check a paper jam does not occur.
Set the correct paper size, or reload the paper and
press [Close].
1-46,
9-13
Close Scanner Cover
The ADF cover is open when transmission starts. Close
the ADF cover securely.
—
Close the cassette
The specified cassette is pulled out. Be sure to close the
cassette.
—
Command is full
The number of reserved commands has exceeded
100. Wait until the reserved communications end, or
perform the real time transmission.
—
Communication Error
A communication error occurred.
Check the contents of the communication error and
repeat the operation.
9-18
DB2-90290-60.indb 23
2007/02/02 12:34:24
Summary of Contents for mfx-2200
