Muratec mfx-2200 User Manual Download Page 334

Page: 334 / 382

9-8

Replacing the Stamp (Option)

If the stamp ink becomes light, replace the stamp as follows:

NOTE

• Do not directly touch the stamp surface. If the ink adheres to your hands, wash

with water immediately.

• Please use the stamp authorized by Muratec.
• If the ADF is not installed, you cannot use the stamp.

Open the platen cover.

Open the left side of the document pad.

Be sure to open only the left side. Leave the right side as it is.

Pull the lever and pull out the stamp unit.

DB2-90290-60.indb 8

2007/02/02 12:34:16

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands