Muratec mfx-2200 User Manual Download Page 218

Page: 218 / 382

4-36

Deleting stored documents

Delete documents stored in bulletin boxes.

Press <Menu>, <8>, [Enter].

Select “Delete” using the cursor keys and press [Enter].

Select “F-Code Bulletin” using the cursor keys and press [Enter].

Select the F-code box in which your desired documents are stored
using the cursor keys and press [Enter].

Close

Enter

Delete bulletin doc 1/7

01:Service Division

02:Paris Office

03:Tokyo Office

If the I.D. code is registered, enter the I.D. code (4 digits) using the
numeric keys and press [Enter].

Clear

Cancel

Enter

Delete bulletin board doc

Enter I.D.Code

Select the file number using the cursor keys and press [Enter].

Close

Enter

Delete bulletin doc 1/11

All stored documents.

01:Already stored.

02:Not registered!

• Select “All stored documents.” to delete all documents stored in this

file number.

To delete, press [Yes].

Yes

Delete bulletin board doc

01:Already stored.

OK to delete?

DB2-90290-60.indb 36

2007/02/02 12:33:20

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Muratec mfx-2200, User Manual, Page: 218 / 382

Search results

Summary of Contents for mfx-2200

Reviews: