Muratec mfx-2200 User Manual Download Page 15

Page: 15 / 382

xiii

Precautions

Besides “Safety Information” supplied with this product, please observe the

following instructions.

Installing the machine

• Do not let any object obstruct or plug the ventilation holes of this product. Accumulated

heat inside the product could result in a malfunction.

IMPORTANT

• Install the machine to keep the ventilating slot of the machine at least 10 cm away

from walls or other devices.

• To ensure proper ventilation and easy operation, secure an adequate installation

space around the machine.

1121 mm

1021 mm

341 mm

1198 mm

1098 mm

1093 mm

893 mm

345 mm

100 mm

• Do not install in places exposed to extreme temperature difference. Use your

machine within the temperature range of 10°C to 32°C, the humidity range of 20%
to 80%RH.

• Avoid installing or using outdoors.

DB2-90290-60.indb 13

2007/02/02 12:31:20

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands