Muratec mfx-2200 User Manual Download Page 348

Page: 348 / 382

9-22

R: Reception Errors

Mode Error

codes

Description of code

Countermeasure

G3 Reception

R.1.1

Your machine is set to manual
reception or transfer reception
and is ready to receive, but no
signal comes from the sending
party

The sending party may operate

incorrectly. If you know who the sending
party is, ask him/her to resend the
document.

R.1.2

Your machine's mode does not
match with the sending party's

If you know who the sending party is,

ask him/her to resend the document.

If this error occurs repeatedly, contact

your authorized Muratec dealer.

Junk fax is received when the
junk fax block function is on
(only displayed in the auto print
journal)

R.1.4

Transmission is canceled during
the polling reception (only
displayed in the auto print
journal)

If you know who the sending party is,

ask him/her to resend the document.

R.1.5

Due to a line error, communication
failed

If you know who the sending party is,

ask him/her to resend the document.
If this error occurs repeatedly, contact
your authorized Muratec dealer.

R.2.3

Due to a line error, the line is
disconnected

R.3.1

A document was pulled out
or <Stop> was pressed by the
sending party

R.3.3

Due to a line error, the signal cut
off during reception (due to line
error)

R.3.4

Reception is not available even at
the slowest speed (due to a line
error)

R.4.2

The signal cut off during reception
(due to line error)

If this error occurs repeatedly, contact

your authorized Muratec dealer.

R.4.4

Memory overflow (only displayed
in the auto print journal)

ECM Reception

R.5.1

The signal cut off during reception
The sending party pressed <Stop>

If you know who the sending party is,

ask him/her to resend the document.
If this error occurs repeatedly, contact
your authorized Muratec dealer.

R.5.2

The signal cut off during reception
(due to line error)

R.8.1

Your machine's mode does not
match with the other machine's

Check the other machine. The other

party may not have a document, for
example, in polling.



DB2-90290-60.indb 22

2007/02/02 12:34:24

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands