Muratec mfx-2200, User Manual

Page: 84 / 382

2-2
Before Copying
Automatic document size detection
Document sizes which can be automatically detected
The sizes of the following standard size documents can be automatically
detected.
Scanning
Document size A3
B4 A4
A4
B5
B5
A5
A5
Document glass
       
ADF
       

Automatic document size detection is not available when the mirror carriage under
the document glass is operating.
When the document size cannot be automatically detected
When the document size cannot be automatically detected, for example,
when you load the custom document, the following message is displayed.
Paper 1:A4 Ratio:100%
Auto size detection failed!
Using the autoselected paper?
Press start or stop key.
Paper Zoom
When there is no appropriate paper to match the document
When the document size is detected, but there is no appropriate paper to
match the document, the following message is displayed.
Paper 1:A4 Ratio:100%
Paper size is unsuitable
Using the autoselected paper?
Press start or stop key.
Paper Zoom
Press <Start> to copy on to the displayed paper and in the displayed
ratio. Depending on the paper, the image could run off the paper or
there could be extra blank areas on the paper.
Press <Stop> to cancel the voice guidance. Press <Stop> again to
cancel copying. Select the ratio or paper and copy again.
Press [Paper] to select the paper to copy on.
Press [Zoom] to select the copying magnification.
When the document size cannot be automatically detected (when
using the advanced function)
The following screen is displayed when the document size on the glass
cannot be detected while the combine copy, repeat coy, or series copy is set.
Specify the document scan size and copy.
ScanSize
A3 A5 B5
A4 A5 B5
A4 B4
Cancel Enter
Select the document size using the cursor keys and press [Enter].



•
•
•
•

DB2-90290-60.indb 2 2007/02/02 12:31:52