Muratec mfx-2200 User Manual Download Page 357

Page: 357 / 382

9-31

Maintenance

and

Troubleshooting

Symptom

Cause

Countermeasure

Reference

page

The whole paper is
printed in black.

The drum or toner cartridge
is worn out or broken.

Replace with a new drum
or toner cartridge.

9-2

The machine may
malfunction.

Please contact your
authorized Muratec dealer.

9-35

Nothing is printed Check if a document is not

loaded upside down.

Load the document
correctly.

1-60

More than one sheet of
paper were fed through at
the same time.

Tap paper well before
loading paper.

1-45

The toner in the cartridge
has run out.

Replace with a new toner
cartridge.

9-2

The drum or toner cartridge
is worn out or broken.

Replace with a new drum
or toner cartridge.

9-2

The machine may
malfunction.

Please contact your
authorized Muratec dealer.

9-35

Blank spots are
printed

Paper is moist.

Replace with a new paper.

1-45

Appropriate paper is not
used.

Use appropriate paper.

1-43

The document glass is dirty. Clean the document glass.

9-11

Paper gets
wrinkled or with
the letters blurry

Appropriate paper is not
used.

Use appropriate paper.

1-43

Paper is moist.

Replace with a new paper.

1-45

Blank spots are
printed in the
paper feeding
direction

The drum or toner cartridge
has not been installed
correctly.

Install the drum or toner
cartridge correctly.

9-2

The drum or toner cartridge
is worn out or broken.

Replace with a new drum
or toner cartridge.

9-2

The document glass is dirty. Clean the document glass.

9-11

The scanner head is dirty.

Use a clean, dry cloth or
tissue paper to slide and
wipe the scanner head
lightly.

9-11

DB2-90290-60.indb 31

2007/02/02 12:34:27

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands