Muratec mfx-2200 User Manual Download Page 239

Page: 239 / 382

5-7

Operation

Management

Press [Yes].

The department management list is printed.

Department List
Would you like to print?

Yes

NOTE

To shortcut the process, press <Menu>, <1>, <0>, <1>, <9>, [Enter], and press [Yes].

Deleting accumulated data

Delete all accumulated data by department.

Press <Menu>, <7>, <1>, <9>, [Enter].

Select “Reset counter” using the cursor keys and press [Enter].

Dept. Management 2/2

Cost Management:00.00

Reset counter

Close

Enter

Press [Yes] to delete accumulated data.

Reset counter
OK to delete?

Yes

Press [No] to return to step 2.

Press <Reset> to return to the standby screen.

DB2-90290-60.indb 7

2007/02/02 12:33:31

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands