Muratec mfx-2200 User Manual Download Page 114

Page: 114 / 382

2-32

Duplex copying of one-sided documents

Copy the one-sided documents onto both sides of a single sheet of paper.

Load your document and press <Copy>.

Press <Menu>.

Select “Duplex Copy” using the cursor keys and press [Enter].

Select “1



2sided” using the cursor keys and press [Enter].

Duplex Copy

1->2sided

Book(Face)

2->2sided Book(F&B)

2->1sided

Cancel

Enter

Select “LeftRight” or “Top” for the binding position of copied images.

Duplex Copy/1->2sided

Finish :

LeftRight

Top

Cancel

Enter

NOTE

The output copied images depend on the document loading direction. For details, refer
to “Document loading direction (one-sided documents



duplex copying)” (page 2-33).

Press [Enter].

The icons (

) of duplex copy and sort copy are displayed on the

standby screen.

Set other functions as necessary.

Press <Start>.



DB2-90290-60.indb 32

2007/02/02 12:32:16

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands