Muratec mfx-2200 User Manual Download Page 16

Page: 16 / 382

xiv

Caution labels and indicators

• The caution labels and indicators are attached to the machine as shown below, to avoid

any serious injury.

• The fuser unit and the area around it inside the machine are extremely hot.

To avoid getting burned,

DO NOT TOUCH

• Do not burn toner cartridges. Exposure to an open flame can cause the toner

cartridge to burn or explode, causing serious injury.

• Never expose a cartridge to direct sunlight.
• Never attempt to disassemble a toner cartridge or attempt to refill it.

DB2-90290-60.indb 14

2007/02/02 12:31:21

Summary of Contents for mfx-2200































































































































































































































































































































































































Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands

Muratec mfx-2200, User Manual

Search results

Summary of Contents for mfx-2200

Reviews:

Related manuals for mfx-2200

Brands by name

Popular brands